|Place of Origin:||China|
|Certification:||ISO9001 : 2018|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||Inner packing: wrapped by bubble bag,foam. Outer packing: standard export carton|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||2000 kilograms per month|
|Material:||Tungsten Carbide||ISO Code Grade:||K10,K20,K30|
|Surface:||Blank, Grinding, Polishing||Size:||Customized|
ball valve seat,
tungsten carbide washers
Tungsten Carbide Valve Seat/Extreme Hardness And Wear Resistance Carbide Seat
Tungsten cemented carbide is the preferred material for parts that must withstand all forms of wear (including sliding abrasion, erosion, corrosion/wear and metal-to-metal galling) and exhibit a high degree of toughness. It exhibits high compressive strength, resists deflection, and retains its hardness values at high temperatures, a physical property especially useful in metal-cutting applications.
We are offering tungsten carbide valve seats for the application of wear in assembly of Gas Lift Valves, Wire Line Retrievable (WLR) Injection pressure operated (IPO) gas lift valves in Oil & Gas Ind.
|Grade||ISO Code||Chemical Composition(%)||Physical Mechanical Properties (≥)||Application|
|WC||Co||Density g/cm3||Hardness(HRA)||T.R.S N/mm2|
|YG3||K01||97||3||14.90||91.00||1180||Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting.|
|YG6||K10||94||6||15.10||92.00||1420||Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron.|
|YG6X||K20||94||6||15.10||91.00||1600||Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing.|
|YG8||K20-K30||92||8||14.90||90.00||1600||Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting.|
|YG10||K40||90||10||14.70||89.00||1900||Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses.|
|YG10X||K40||89||10||14.70||89.50||2200||Suitable for small diameter micro drills, end mills, rotary boring tools, etc.|
|YG15||K30||85||15||14.70||87.00||2100||Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses.|
|YG20||K30||80||20||13.70||85.50||2500||Stamping die, stamping watch parts, musical instrument spring piece.|
|YG20C||K40||80||20||13.70||82.00||2200||punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate.|
|YG30||G60||70||30||12.80||82.00||2750||Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die.|
Grade and applicaton for valve seat
|Grade||Co (wt%)||Density (g/cm³)||Hardness(HRA)||TRS (≥N/mm²)||Application|
|Grade||Ni (wt%)||Density (g/cm³)||Hardness (HRA)||TRS (≥N/mm²)||Application|
|Seats dimension (mm)|
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to 15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full payment; if the products are out of stock, you need to make about 50 percent of full payment and then we will start the production process. However, you still need to pay the rest of charges before we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.