|Place of Origin:||China|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||Inner packing: wrapped by bubble bag,foam. Outer packing: standard export carton|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||2000 kilograms per month|
|Material:||100% Raw Materail||Density:||12.75-15.3 G/cm3|
|Application:||Wood Cutting/plastic Cutting/forestry Cutting||Size:||Customized|
|Keywords:||Tungsten Carbide Strip For Wood Cutting||Grade:||YG6/YG8/YG8C/YG10/YL10.2|
tungsten carbide wear plates,
tungsten carbide sheet
Solid Tungsten Carbide Wood Cutting Strip / Solid Carbide Wood Cutter Strip
Application of alloy tungsten carbide bar
carbide strip,tungsten carbide strips,tungsten carbide bar,Carbide squre bar Carbide strip is widely used for general wood cutters / hard wood cutters, plastic and tobacco cutting.
And it is suitable for the production of various types of motors, electronic progressive dies punches.
Adopting HIP sintering technology and cryogenic processing technology, the inner metallographic structure of carbide strips/blanks/plates has been improved,which avoids the crack causing during the strips/blanks/plates cutting and forming process.
All of our tungsten carbide strips/blanks/plates must be strictly inspected and only those without any harm such as pore, bubbles, cracks etc. can be shipped out. We produce various sizes and grades of tungsten carbide strips/blanks/plates as per client's requirements.
Tungsten carbide strips/blanks/plates are usually used for general wood cutters / hard wood cutters ,plastic and tobacco cutting . and meet the ISO9001:2018 quanlity standard. We can make the shipment in the shortest delivery time with the compeititve price than any other factory.
We can manufacture various cemented carbide strips/blanks/plates as per customer's requirments based on the differente markets.
Minimum grind stock: thickness: +0.2mm, width: +0.3mm, length: +0.2mm.
Parallelism & flatness tolerances: within 0.5mm.
All the produces must be inspected strictly with the ultrasonic and only those haven't any harm such as pore can be shipped out
High density, high wear& impact resistance, which lead them a long life time
1. Raw material purity greater than 99.95%, impurity content is very small, the physical properties of the sheet more stable
2. Use of spray drying technology, the material in the fully sealed conditions using high purity nitrogen protection, effectively reducing the mixing process of oxygen preparation possibilities, higher purity, the material is not easy to contaminate
3. Plate density uniform: 300Mpa isostatic press suppression, effectively prevent the production defects, plate density is more uniform
4. Board compactness is very good, strength and hardness indicators are very good: the use of low-pressure sintering ship technology, the plate effectively eliminate the pores, the quality is more stable
5. Use of low-temperature treatment technology, so that the internal micro-structure of the board can be improved, the internal stress can be greatly eliminated, to avoid the board in the cutting process cracks
Details of tungsten carbide plate
|Grade||ISO Code||Chemical Composition(%)||Physical Mechanical Properties (≥)||Application|
|WC||Co||Density g/cm3||Hardness(HRA)||T.R.S N/mm2|
|YG3||K01||97||3||14.90||91.00||1180||Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting.|
|YG6||K10||94||6||15.10||92.00||1420||Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron.|
|YG6X||K20||94||6||15.10||91.00||1600||Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing.|
|YG8||K20-K30||92||8||14.90||90.00||1600||Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting.|
|YG10||K40||90||10||14.70||89.00||1900||Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses.|
|YG10X||K40||89||10||14.70||89.50||2200||Suitable for small diameter micro drills, end mills, rotary boring tools, etc.|
|YG15||K30||85||15||14.70||87.00||2100||Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses.|
|YG20||K30||80||20||13.70||85.50||2500||Stamping die, stamping watch parts, musical instrument spring piece.|
|YG20C||K40||80||20||13.70||82.00||2200||punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate.|
|YG30||G60||70||30||12.80||82.00||2750||Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die.|
|ISO Code||Grain Size (μm)||Co (mass) %||TRS (GPa) *1||Hardness||Application||Work Material|
|HRA *2||HV *3||For Automatic Lathes||Cemented Carbide Plates||General Steel||Stainless Steel||Cast Iron||Non-ferrous Metal||Heat Resistant Alloy|
Detail Specification For Tungsten Carbide Strips
A1: What is your main product?
Q1: The main product include tungsten carbide bar, carbide wire drawing die, carbide drill bit button, carbide SS10 tips, carbide strip and carbide plate, anvil, carbide inserts, and any other carbide products and customized products.
A2: Do you have certification on your products?
Q2: ISO 9001:2018
A3: What is about your general delivery date?
Q3: Nomally 7-15 workdays .
A4: What is your packing?
Q4: We use standard export packing and customization is available.
A5: Can I get the samples?
Q5: Sure, contact us directly.