Customized Tungsten Carbide Rolls Solid K10 K20 K30 High Wear Resistance

Basic Information
Place of Origin: China
Brand Name: XYMJ
Model Number: Customized
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: Inner packing: wrapped by bubble bag,foam. Outer packing: standard export carton
Delivery Time: 7-15
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 2000 kilograms per month
Detail Information
Material: WC+CO ISO Code Grade: K10,K20,K30
Density: 12.75-15.3 G/cm3 HRA: 82-92
TRS: 1180-2250 N/mm3 Application: Rolling
Particle: 0.8-1.2um Surface: Customized
High Light:

tungsten carbide roll rings


wire straightener rollers

Product Description

Customized K10,K20,K30 Solid Carbide Tools High Wear Resistance  Tungsten  Carbide Roller




The guide roller (guide wheel) is a rod in the iron and steel field, and the main consumed spare parts on the wire rolling equipment. During the rolling process, the red steel is ensured to smoothly enter the wheel groove. So as to prevent the winding of the steel and the tail and the guide clamping effect. At the high speed wire speed of 110 m/ s, the rotating speed of the guide roller (guide wheel) reaches more than 50,000 revolutions per minute, the surface temperature is 800-1100 DEG C, the physical impact and the stress are subjected to certain physical impact and stress, and the high-speed wire is required to have high acceleration performance. As a result of the contact with the working substance, the surface of the contact material is easily bonded to the metal impurities.Steel-bonded carbide high-line finish roll guide wheel, also known as roller guide wheel.


Roller guide wheel is an indispensable part of wire rod in the rolling process of rolling mill. It requires high hardness, good abrasion resistance(service life matching with high-quality bearing), good thermal conductivity, with certain red-hard property, especially high line rolling(rolling speed is 80,120m/s).Most of the steel used in the market is made of steel, because of its poor wear resistance, low service life and high replacement frequency, the large-scale benefit of wire rod is seriously restricted, and the guide roller guide wheel of steel-bonded cemented carbide high wire finishing rolling fills this defect.


Grade List


Grade ISO Code Chemical Composition(%) Physical Mechanical Properties (≥) Application
WC Co Density g/cm3 Hardness(HRA) T.R.S N/mm2
YG3 K01 97 3 14.90 91.00 1180 Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting.
YG6 K10 94 6 15.10 92.00 1420 Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron.
YG6X K20 94 6 15.10 91.00 1600 Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing.
YG8 K20-K30 92 8 14.90 90.00 1600 Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting.
YG10 K40 90 10 14.70 89.00 1900 Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses.
YG10X K40 89 10 14.70 89.50 2200 Suitable for small diameter micro drills, end mills, rotary boring tools, etc.
YG15 K30 85 15 14.70 87.00 2100 Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses.
YG20 K30 80 20 13.70 85.50 2500 Stamping die, stamping watch parts, musical instrument spring piece.
YG20C K40 80 20 13.70 82.00 2200 punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate.
YG30 G60 70 30 12.80 82.00 2750 Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die.


Production Process


Customized Tungsten Carbide Rolls Solid K10 K20 K30 High Wear Resistance 0



Q1: How can I place order?
A1: You can contact us by email about your order details, or place order on line.

Q2: How can I pay you?
A2: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.

Q3: What’s the order procedure?
A3: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15 days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

Q4: How do you take care when your clients received defective products?
A4: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

Q5: How do you check all the goods in the production line?
A5: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.


Contact Details